J.C.C-FLEX 500 EU
Epoxidised polyurethane joint sealant for horizontal and vertical joints
JCCFLEX 500 EU is a two component solvent free high grade Epoxidised polyurethane based
sealant which cures to form flexible, tear resistant rubber for vertical and horizontal joints with
excellent recovery properties after extended periods of compression or elongation. JCCFLEX
500 EU is supplied in any colour and gun grade sealant.
JCCFLEX 500 EU is used for sealing both vertical and horizontal joints when the amount of
expected movement or other performance requirements are high. JCCFLEX 500 EU is used for
joint in building and construction above or below ground, for sea walls, subways, multi storey
buildings and bridges. Also for joints subjected to fuel chemicals attacks as in sewage projects,
reservoirs, and swimming pools.
J.C.C-FLEX 500 EU
▪ Excellent adhesions to all materials applied in building construction projects.
▪ Excellent elastomeric and recovery properties.
▪ Good resistance to chemicals and fuels.
▪ Wide range of operating temperatures.
▪ High resistance to weathering, ultraviolet rays.
▪ Resistance bio-degradation in sewage treatment
Appearance Pigmented paste
Consistency Gun grade
Solid content 100 %
Specific Gravity 1.45-1.50
Pot life @ 25 °C 2 hours
@ 35 °C 60 minutes
Tack free time @25 °C 24 hours
@35 °C 12 hours
Mixing ratio (A: B) by weight 8A: 1B
Final setting 7 days
Hardness (shore A) 35-50
Elongation @break 100%
Health and Safety
Health & Safety
JCCFLEX 500 EU is non-toxic, should not contact with skin and eyes or be swallowed .avoid
inhalation of vapors and ensure adequate ventilation .wear suitable protective clothing, gloves .in
case of contact with eyes rinse immediately with plenty of clean water and seek medical advice